.

6044 North Figueroa
Los Angeles, CA. 90042

We offer quality design, fabrication
and installation of Woven Wire Mesh Partitions.

(323) 256-4848
Fax (323) 256-1950

sales@KingwireUSA.com

KING WIRE PARTITIONS, Inc.
We offer you the result of over thirty years of experience in quality design, fabrication and installation of Woven Wire Mesh Partitions. As a leading manufacturer of Wire Mesh Partitions, KING WIRE PARTITIONS, Inc. stocks a large inventory of Wire Mesh panels, doors, and related hardware.

Woven Wire Partitions

Wall Clips

3 Way Connection

T  End Bar Connection

Wall Clips

3 Way Connection

"T" End Bar Connection

Sliding Door Track & Bracket

Sliding Door Bottom Guide

Tapered Post

Sliding Door Track & Brackets

Sliding Door Bottom Guide

Tapered Post

Sliding Doors

Sliding Door Sliding doors are equipped with heavy duty four-wheel hangers, box track, and mortise-type cylinder locks.

Hinged Doors

Hinged Door

Standard doors are 3' wide with 6"-11" high opening equipped with mortise-type cylinder locks.
Transoms are provided for partitions higher than 7 ft. When ordering specify the position of the door. Looking at the key side follow the sketch to determine the position of door.

Lft-Out

Right-Out

Lft-In Right-In

LO Left-Hand Out

RO Right-Hand Out

LI Left-Hand In

RI Right-Hand In

Service Windows

Service Window Standard service windows are provided in a 2ft wide panel and equipped with shelf and a pair of positive lockable slide bolts.

Double Stacking Panels

Partitions extending above 15 feet high must be double stacked. This requires using 2-1/2" x 5/16" intermediate flat bar post between panels. To specify double stacking panels use standard part number followed with "D"

i.e. KP510D

i.e.  d-kp510d

Doble Stacking

Ceiling Panels

Use our standard Ceiling panels to build a fully enclosed partition system. Specify standard panel part number followed with "C" i.e. KP508C "I" beam CIB20 required to support ceiling panels spanning more than 10'
Ceiling Panels

Wire Mesh Panels

PP-Product Presentation

UA-Uses Applications

Wire Mesh Panels

Material Specifications

Specifications: NO. 400A

MESH: 10 gauge steel wire woven into 1-1/2" diamond mesh, securely clinched to frames.

VERTICAL FRAMES: 1/14" x 5/8" cold rolled "C" channel with 1/4" bolt holes 14" on center.

HORIZONTAL FRAMES: 1" x 1/2" channel with all joints mortised and tenoned.

CENTER REINFORCING BAR: (2) channels 1" x 1/2" riveted toe to toe

TOP CAPPING BAR: 1-1/2" x 1" cold rolled channel with 1/4" "U" bolts 2' 4" on center.

CORNER POSTS: 1 -1/4" x 1-1/4" angle with 1/4" bolt holes to match partition.

SLIDING DOOR FRAMES: 1-1/2" x 3/4" channel banded with 1 -1/2" x 1/8" flat bar. Each door to have 2 four-wheel hangers, box track. and bottom channel guide.

HINGED DOOR FRAME: 1 -1/4" x 1/2" x 1/8" channel banded with 1 - 1/4" x 1/8" fla bar 1-3/8" x 3/4" x 1/8" angle welded to lock side. 1-1/2" pair butt hinges bolted to door and transom bar.

LOCKS: Doors are equipped with special mortise type cylinder locks operated from outside with key.

FINISHES: One shop coat gray tan, black or green enamel paint.

SWEEP SPACE: 3-1/2" under all partitions and doors.

FLOOR SOCKETS: 2" high cast iron with set screw adjustment.

TAPERED POST: Tapped3/16" Steel Plate. Bolted to partition and anchored to floor with 3/87" expansion bolts required one every 15 to 20 lineal feet of partition.

MISC: All bolts, hardware, and accessories for complete installation to be included.

Stock Size Mesh Partitions

Width

8' Height

10' Height

12' Height

15' Height

Stock No.

Stock No.

Stock No.

Stock No.

Panels

6'-0"
5'-0"
4'-0"
3'-0"
2'-0"
1'-0"

KP-608
KP-508
KP-408
KP-308
KP-208
KP-108

KP-610
KP-510
KP-410
KP-310
KP-210
KP-110

-
KP-512
KP-412
KP-312
KP-212
KP-112

-
KP-515
KP-415
KP-315
KP-215
KP-115

Slide Gates, 7'- 5" high Opening 9'-5" high Opening

5'-0"
6'-0"
8'-0"
10'-0"

KS-508
KS-608
KS-808
KS-1008

KS-510
KS-610
KS-810
KS-1010

KS-512
KS-612
KS-812
KS-1012

KS-515
KS-615
KS-815
KS-1015

Hinged Doors 6'-10" High Opening

3'-0"
4'-0"
3'-0" (Pair)
3'-0" Dutch

KH-308
KH-408
KH-608
KD-308

KH-310
KH410
KH-610
KD-310

KH-312
KH-412
KH-612
KD-312

KH-315
KH-415
KH-615
KD-315

Service Windows:

24" Wide by 18" high opening with shelf Slide up window provided with spring catches Installed

KW-208

KW-210

KW-212

KW-215

Other standard heights are 7' and 9'. Special width and heights are available on order. Special Color finish available as requested. All panels and door sections are standard units which are interchangeable and can be arranged in any floor plan combination as required.

Autocad Details

To download Autocad details, right click on the link and choose "save target as".

Version 2000 :

LOCK RECEIVER & DOOR STOP

A-ELEVATION

B-ELEVATION

CORNER POST

SLIDE DOOR SECTION

SLIDE DOOR TRACK

SLIDING DOOR & BOTTOM GUIDE

SLIDING DOOR TRACK AND BRACKET

TYPICAL ANGLE POST

TYPICAL CEILING PLAN

TYPICAL DOUBLE HINGE DOOR SECTION

TYPICAL FLOOR PLAN

TYPICAL HINGE DOOR SECTION

TYPICAL INTER-PANEL CONNECTION

TYPICAL PANEL CONNECTION AT WALL

TYPICAL PANEL SECTION

TYPICAL PARTITION HEAD AT WALL

TYPICAL PARTITION WITH CEILING

Version 14 :

LOCK RECEIVER & DOOR STOP

A-ELEVATION

B-ELEVATION

CORNER POST

SLIDE DOOR SECTION

SLIDE DOOR TRACK

SLIDING DOOR & BOTTOM GUIDE

SLIDING DOOR TRACK AND BRACKET

TYPICAL ANGLE POST

TYPICAL CEILING PLAN

TYPICAL DOUBLE HINGE DOOR SECTION

TYPICAL FLOOR PLAN

TYPICAL HINGE DOOR SECTION

TYPICAL INTER-PANEL CONNECTION

TYPICAL PANEL CONNECTION AT WALL

TYPICAL PANEL SECTION

TYPICAL PARTITION HEAD AT WALL

TYPICAL PARTITION WITH CEILING