Hinged Doors-Standard doors are 3’ wide with 6’-11” high opening, equipped with mortise type cylinder locks.

Transoms are provided for partitions higher than 7 ft.
When ordering, specify the position of the door.

Looking at the key side, follow the sketch to determine the position of the door.

Sliding Doors-Sliding doors are equipped with heavy duty four-wheel hangers, box track, and mortise type cylinder locks.

Service Window-Standard service windows are
provided ina 2 ft. wide panel and equipped with
shelf and a pair of positive lockable slide bolt.
When ordering, please specify the position of the shelf (Example: inside, outside, none).

Double Stacking Panels-Partitions extending above 15 feet high must be double stacked.

This requires using 2 1/2” x 1/4” intermediate flat bar post between panels. To specify double stacking panels use standard part number followed with “D” i.e. KP510D

Ceiling Panels-Use our standard ceiling panels to build a fully enclosed partition system. Specify standard panel part number followed with “C” i.e. KP508C. “I” beam CIB20 required to support ceiling panels spanning more than 10’.